How should the punch press operate correctly
UP data:2015-06-27
How should the punch press operate correctly
The 1. punch operator must learn to master the structure and performance of the equipment, be familiar with the operation rules and obtain the operation permission before operating independently.
2. proper use of safety protection and control devices on equipment should not be allowed to be removed at will.
3. check the transmission, connection, lubrication and other parts of the machine and whether the protective device is normal. The screws must be firm and must not be moved.
4. machine tools should be operated for 2-3 minutes before work, check the flexibility of control devices such as foot brake, and confirm that they can be used after normal operation, and do not run ill.
5. the mold must be firm, the upper and lower die alignment, ensure the position is correct, use the hand to move the machine tool to test the blanking (empty car), to ensure that the mold is in good condition.
6. before you drive, pay attention to lubrication and remove all floating objects on the bed.
When the 7. punch is moved or running, the operator should stand properly, the hand and head should keep a certain distance from the punch, and pay attention to the action of the punch at all times, and do not talk with others.
8. when making or making short workpieces, special tools should not be used to directly feed or pick up parts.
9. when making long or hard parts, we should set up safety support frame or take other safety measures to avoid digging.
10. when a single punch is not allowed, the hands and feet are not allowed to be placed on the hand or foot brake.
11. when two or more persons work together, the person who is responsible for moving (gate) must pay attention to the movement of the feeder.
12. stop the work at the end of the work, cut off the power supply, wipe the machine tools, and sort out the environment.
How should the punch press operate correctly
The 1. punch operator must learn to master the structure and performance of the equipment, be familiar with the operation rules and obtain the operation permission before operating independently.
2. proper use of safety protection and control devices on equipment should not be allowed to be removed at will.
3. check the transmission, connection, lubrication and other parts of the machine and whether the protective device is normal. The screws must be firm and must not be moved.
4. machine tools should be operated for 2-3 minutes before work, check the flexibility of control devices such as foot brake, and confirm that they can be used after normal operation, and do not run ill.
5. the mold must be firm, the upper and lower die alignment, ensure the position is correct, use the hand to move the machine tool to test the blanking (empty car), to ensure that the mold is in good condition.
6. before you drive, pay attention to lubrication and remove all floating objects on the bed.
When the 7. punch is moved or running, the operator should stand properly, the hand and head should keep a certain distance from the punch, and pay attention to the action of the punch at all times, and do not talk with others.
8. when making or making short workpieces, special tools should not be used to directly feed or pick up parts.
9. when making long or hard parts, we should set up safety support frame or take other safety measures to avoid digging.
10. when a single punch is not allowed, the hands and feet are not allowed to be placed on the hand or foot brake.
11. when two or more persons work together, the person who is responsible for moving (gate) must pay attention to the movement of the feeder.
12. stop the work at the end of the work, cut off the power supply, wipe the machine tools, and sort out the environment.
