How to correct the correct adjustment of the rotary tiller
UP data:2015-06-27
1, right and left adjustment. The rotary tiller is separated from the ground to check the height of the left and right ends of the knife tips from the ground.
2, before and after adjustment. First, the rotary tiller is lowered to the plough depth, and the length of the bar (central rail) is changed, so that the middle transmission gear box is in a degree (or parallel to the central transmission shaft).
3, the adjustment of the height of promotion. The angle of the cardan joint does not exceed 30 degrees when it rises. Usually, the knife tip needs only about 20 centimeters above the ground to turn and empty. When working in the field, the highest position of promotion should be restricted.
4. The adjustment of soil properties. Normally, the soil breaking performance is adjusted by changing the speed of advance. But the rotary cultivator with intermediate transmission can also be adjusted by changing the speed of the cutter shaft.
5, the adjustment of the depth of the ploughing. When the rotary tiller is equipped with a tractor with strong regulation and position adjustment hydraulic system, the position adjustment should be used to prevent the adjustment of the rotary tiller so as not to damage the rotary tiller. When the rotary cultivator reaches the ploughing depth, the position control screw is used to block the position adjustment handle, so that each tillage depth is consistent.
1, right and left adjustment. The rotary tiller is separated from the ground to check the height of the left and right ends of the knife tips from the ground.
2, before and after adjustment. First, the rotary tiller is lowered to the plough depth, and the length of the bar (central rail) is changed, so that the middle transmission gear box is in a degree (or parallel to the central transmission shaft).
3, the adjustment of the height of promotion. The angle of the cardan joint does not exceed 30 degrees when it rises. Usually, the knife tip needs only about 20 centimeters above the ground to turn and empty. When working in the field, the highest position of promotion should be restricted.
4. The adjustment of soil properties. Normally, the soil breaking performance is adjusted by changing the speed of advance. But the rotary cultivator with intermediate transmission can also be adjusted by changing the speed of the cutter shaft.
5, the adjustment of the depth of the ploughing. When the rotary tiller is equipped with a tractor with strong regulation and position adjustment hydraulic system, the position adjustment should be used to prevent the adjustment of the rotary tiller so as not to damage the rotary tiller. When the rotary cultivator reaches the ploughing depth, the position control screw is used to block the position adjustment handle, so that each tillage depth is consistent.
